Your home record · For homeowners
Add your electrical panel
Record each breaker panel in the home, where it is and how many spaces it has, so you can map which breaker runs what.
You’ll be asked to sign in first.
Add a panel
- Open your home, choose Equipment, then Electrical. Open it
- Press + Add a panel.
- Give it a Name (the first one starts as “Main panel”) and say Where is it?.
- Enter the Main breaker (amps) if you know it, and count the Breaker spaces, including empty ones.
- Choose the Numbering: Two columns (1,3,5 left · 2,4,6 right) or One column. Add Location notes and press Create panel.
Change panel details
- Open the panel and press Panel settings.
- Change the name, location, Main breaker (amps), Service size (amps), Breaker spaces, Manufacturer, Model or notes, and save.
- Press Delete panel to remove it and everything mapped on it. This can’t be undone.
Get the most from it
- Each panel card shows how many breakers are mapped and what percent are labeled.
- Add a subpanel (for example in the garage) as its own panel.
Questions
Can I reduce the number of spaces later?
Yes, but not below the highest space that already has a breaker.
Words used here
- Breaker
- A switch in your electrical panel that cuts power to one circuit when it overloads. Each one controls a set of outlets, lights or an appliance.
- Equipment
- The appliances and systems in your home (furnace, water heater, fridge) with model, serial, install date and service history.
- Main breaker
- The big breaker that shuts off power to the whole panel. Its amp rating is the most the panel can draw.
- Panel
- The metal box of breakers where power enters your home and is split into circuits. Mezzo lets you map every breaker.
- Service size
- How much power your home’s electric service can supply, in amps (often 100, 150 or 200). It limits what you can add.
- Subpanel
- A second, smaller breaker panel fed from the main one, often in a garage, basement or addition.
Did this help?
Related
- Map and search your breakers · See your panel as it looks on the wall, tap a space to record the breaker’s size, type and what it controls, and search to find the breaker for a room or appliance.
- Map your panel step by step with guided mapping · Guided mapping takes you through the panel one space at a time: flip a breaker off, see what lost power, record it, and move on. Progress saves as you go.
- Print a label for your panel door · Print the whole breaker directory on one sheet for the inside of the panel door, with a QR code that opens the live version in Mezzo.
- Draw walls, doors, lights and fixtures on the floor plan · Draw on the digital plan: rooms, walls, doors, windows and stairs, plus lights, outlets, switches, plumbing fixtures, appliances, the panel and shut-offs. Link anything electrical to its breaker.
- Record your shutoffs and utility contacts · Note where the water, gas and electric shutoffs are, with a photo and how to turn each one, plus your utility companies’ emergency numbers. Emergency mode shows them.