Your home record · For homeowners
Add a floor plan and turn it into a digital plan
Add a plan for each floor. Upload a picture of the plan and place your rooms on it, and Mezzo draws a digital plan from it; or start from a blank floor and draw the rooms yourself.
You’ll be asked to sign in first.
Add a plan
- Open your home, choose More, then Floor plan. Open it
- Pick the Floor and, if you like, a Name (for example “Main floor”).
- Choose a Picture if you have one: a scan, a photo of the drawing, or a screenshot of the listing plan (PNG, JPG or WebP, up to 15 MB). Leave it empty for a blank floor.
- Press Add floor plan. With several floors, switch between them with the buttons above the plan.
Place your rooms on the picture
- Add your rooms on the Rooms page first. The plan uses them.
- In Place a room, choose a room, then click the picture where that room is. A label appears there.
- Repeat for each room. The hint says how many rooms are not placed yet.
- To move a label, choose the room again (it says “move it”) and click the new spot. Press × on a room’s chip to take it off the plan.
Make the digital plan
- Once every room is placed, Mezzo draws the plan by itself. You see “Drawing your floor plan from the picture…”, which can take up to a minute.
- To draw it sooner, press Make the digital plan now to use the rooms placed so far.
- Switch between Digital plan and Picture (place and adjust rooms) above the plan.
- On the picture, press Adjust outlines, then drag a room to move it or drag its bottom-right corner to fit the walls. Each change saves as you let go. Press Done adjusting.
- Press Redraw from the picture to start the outlines again. Rooms you adjusted by hand stay as they are.
Get the most from it
- A clear, straight-on picture gives the best outlines. A listing screenshot works well.
- A room marked “rough” was laid out around its spot rather than read from the picture. Drag it to fit.
- The digital plan shows on the Rooms page, and a contractor on a job sees it too.
Questions
What if I don’t have a picture of my plan?
Add the plan without a picture. You get a blank floor and can draw the rooms on it with Draw on the plan.
The plan is drawn but the rooms are only rough boxes.
When reading the picture with AI isn’t available, Mezzo lays out a box around each room’s spot. Use Adjust outlines or Draw on the plan to fix them.
How do I rename or delete a plan?
Use Rename or Delete this plan next to the plan’s name. Deleting a plan also removes the rooms placed on it (the rooms themselves stay in your home).
Words used here
- Done
- The last step of a project: the work is finished. It is closed once the homeowner approves it and the final payment is made.
- Floor plan
- A simple drawing of your home’s rooms, with where things are. A contractor on your job can see it.
Did this help?
Related
- Draw walls, doors, lights and fixtures on the floor plan · Draw on the digital plan: rooms, walls, doors, windows and stairs, plus lights, outlets, switches, plumbing fixtures, appliances, the panel and shut-offs. Link anything electrical to its breaker.
- Choose what the floor plan shows and look up a room · Use Show on the plan to hide or show kinds of things, like outlets or plumbing, and tap a room to see everything recorded for it.
- Add and organize your rooms · Rooms are the backbone of the record: paint colors, circuits, fixtures, equipment and photos all attach to them. Start with a ready-made set or add them one at a time.
- Upload and organize your home’s documents · Keep manuals, warranties, receipts, permits, insurance and the deed in one searchable vault. Mezzo reads each file to fill in its category and key dates, and reminds you before they pass.
- Add a garage, shed, well, septic, pool or utility line · Record everything on the property besides the house: garages and barns, sheds, the well and septic, water, sewer, gas and power lines, the pool and hot tub, patios and gardens. Buildings can have their own rooms, floor plans and sub-panels.