Upkeep and safety · For homeowners
Track smoke alarms, CO alarms and extinguishers
List each smoke, CO and safety device with its install date, battery and test schedule. Mezzo flags the ones due for a test or past their replace-by date.
You’ll be asked to sign in first.
Add a device
- Open your home, choose More, then Safety. Open it
- Under Smoke, CO & safety devices, choose + Add a device.
- Pick the Type: Smoke alarm, Carbon monoxide alarm, Smoke + CO combo, Heat detector, Water / flood sensor, Fire extinguisher or Other.
- Choose the Room and type the Exact spot, such as “Hallway ceiling”.
- Add Installed on and, if the label has one, Replace by (on the label). Leave it blank and Mezzo uses a typical lifespan from the install date.
- Set Test every (months) (1 is the usual), the Battery type and Battery changed date, then choose Add device.
Record a test
- Press the test button on the alarm.
- On the Safety page, choose I tested it next to that device. The next test date is set from today.
- To record a new battery or a replacement, choose Edit and update the dates.
Read the status
- Each device shows a colored status, for example “Test due in 6 days”, “Test overdue by 12 days”, “Replace by 2027-03-01 (90 days)” or “Good until 2031-05-01”.
- A red “Past its replace-by date” means the alarm should be replaced. Old alarms can fail without warning.
- “Add an install or replace-by date” means Mezzo doesn’t know its age yet.
Get the most from it
- Look on the back of each alarm for the manufacture or replace-by date and enter it. It’s the most accurate way to know when to replace it.
- When no replace-by date is given, Mezzo assumes about 10 years for smoke and heat alarms, 7 for CO and combo alarms, 5 for flood sensors and 12 for extinguishers.
- Fire extinguishers don’t have a test button, so they only get replace-by tracking.
Questions
When will Mezzo remind me?
At 60 days, 30 days and on the day a device reaches its replace-by date, and when a test is due once you’ve recorded the first test.
Why does a new alarm say “Never tested”?
Mezzo doesn’t know it has been tested until you choose I tested it (or enter a Last tested date).
Can I track a battery change reminder?
You can record the Battery changed date on each device. Mezzo reminds you about tests and replacement, not battery changes on their own.
Words used here
- CO alarm
- An alarm that sounds when it senses carbon monoxide, a gas you can’t see or smell. They wear out and need replacing every several years.
- Consumables
- Things you replace again and again: air and water filters, bulbs, batteries. Record the size or type so you can reorder without hunting.
- Expected life
- How many years this kind of equipment usually lasts. Mezzo uses it to warn you before something is likely to need replacing.
- Overdue
- Past its due date and not paid yet.
- Safety devices
- Smoke and CO alarms, heat alarms, flood sensors and extinguishers. Mezzo flags ones due for a test, a battery or replacement.
Did this help?
Related
- Record your shutoffs and utility contacts · Note where the water, gas and electric shutoffs are, with a photo and how to turn each one, plus your utility companies’ emergency numbers. Emergency mode shows them.
- Use Emergency mode · In a leak, gas smell, CO alarm, no heat or power cut, Emergency mode shows clear first steps, your shutoffs with photos, and who to call, on one fast page.
- How home reminders work · Mezzo reminds you before maintenance is due, before warranties, documents, permits and insurance end or renew, and when smoke and CO alarms need testing or replacing.
- Print a claim pack for your insurer · The claim pack puts your policies, your inventory with photos and receipts, and photos of the home on one page to print or save as a PDF for an insurance claim.
- Edit your home’s details and fill blanks from public records · The Your home card holds the facts about the house: type, year built, size, roof, heating, water, sewer, HOA, plus notes for contractors about parking, pets, entry and house rules.